Home
Directed Energy Weapons II
7 June - 8 June 2004
Directed Energy Weapons II
Directed Energy Weapons have the potential to become the single most transforming weapon of the 21st Century. Despite further development still being needed to make energy weaponry a battlefield reality, it is no longer an issue of science and technology, it’s a matter of engineering. Directed Energy Weapons, that is High Energy Lasers and High Power Microwaves have the ability to change the very nature of warfare.

This Conference will assess the military potential of directed-energy technologies and weapons systems and their contribution to the Revolution in Military Affairs.

Looking specifically to explore the premise of Directed-Energy warfare, how to leverage Directed Energy systems, Directed Energy Weapon system development, application and characteristics of High Energy Laser and High Power Microwave Systems, Directed-Energy system testing and countermeasures to directed energy weapons.

A unique opportunity to learn from leading experts including:
· DISCOVER the importance nations are placing on developing effective Directed Energy weaponry and systems
· REVIEW the growing number of Directed Energy systems available to future warfighters
· DEVELOP your awareness on the progress being made in Solid & Chemical State Laser and High Power Microwave research
· LISTEN to nation and service specific programmes utilising Directed Energy as an effective force-multiplier
· EVALUATE the relative advantages and prospects for continued development and application of Directed Energy
· MAXIMISE your networking possibilities by attending a two-day conference aimed specifically at experts in the field of Directed Energy

Speakers confirmed to date:
· Dr L Bruce Simpson, Director, Directed Energy Directorate, Air Force Research Laboratory*
· Edward W Pogue, Director, High Energy Laser Joint Technology Office, US Department of Defense*
· Dr Howard R Schlossberg, Laser and Optical Physics Program Manager, Physics and Electronics Directorate, Air Force Office of Scientific Research
· Dr Marion Williams, Chief Scientist, Air Force Operational Test and Evaluation Center
· Colonel Mark Niece, Chief, Laser Division, Air Force Research Laboratory*
· Commander Gregory E Glaros, USN, Transformation Strategist, Office of the Secretary of Defense, Office of Force Transformation*
· Dr Andreas Neuber, Associate Professor, Pulsed Power and Power Electronics Research, Department of Electrical and Computer Engineering, Texas Tech University
· Dr Bucur Novac, Senior Lecturer, Department of Electronic & Electrical Engineering, Loughborough University
· Professor Thomas G Engel, Associate Professor, Electrical Engineering, University of Missouri-Columbia
· Dominique Loye, Technical Advisor, Mines-Arms Unit, Legal Division, International Committee of the Red Cross, Geneva
· Dr Clive Coleman, Chief Technologist, Electro-Optical EW Systems, BAE SYSTEMS Avionics
· Ken Kissell, Vice President and Program Manager, Boeing Laser and Electro Optics Group
· David Snodgrass, Director EO/IR Products, Northrop Grumman

* Subject to Final Confirmation

Conference agenda

clock

8:30

Registration and Coffee

clock

9:00

Chairman's Opening Remarks

Squadron Leader Douglas Vine

Squadron Leader Douglas Vine, Night Vision Training Specialist, RAF Henlow

clock

9:10

KEYNOTE ADDRESS

Commander Gregory Glaros, USN

Commander Gregory Glaros, USN, Transformation Strategist, Office of the Secretary of Defense, Office of Force Transformation

  • Re-directed energy - shaping joint architecture for the development and employment of Directed Energy systems
  • Transformation stewardship for the department
  • DoD Directed Energy architecture and roadmap
  • Developing a DoD enterprise-wide architecture for Directed Energy programs
  • Co-evolving the concepts and technologies in the field of Directed Energy
  • Creating an actionable way ahead
  • clock

    9:50

    SPECIAL ADDRESS

    Dr Howard R Schlossberg

    Dr Howard R Schlossberg, Laser and Optical Physics Program Manager, Physics and Electronics Directorate, Air Force Office of Scientific Research

  • Emerging laser science and technology
  • Diode lasers for infrared countermeasures
  • Advances in wavelength conversion technology
  • Technology advances in Adaptive Beam Control
  • Novel military applications of lasers
  • clock

    10:30

    Morning Coffee

    clock

    11:40

    LASER AND ELECTRO-OPTICAL SYSTEM DEVELOPMENT

    Ken Kissell

    Ken Kissell, Vice President and Program Manager, Boeing Laser and Electro Optics Group

  • Laser concept creation, validation, design, development and demonstration
  • Chemical and Solid State laser engineering & design
  • System architecture
  • Laser and optics laboratory and test facilities
  • Systems engineering; requirements management, functional analysis, system synthesis, analysis and control
  • clock

    12:20

    Networking Lunch

    clock

    13:50

    MOBILITY OF HIGH POWER CHEMICAL LASERS

    Professor Anatoly Boreysho

    Professor Anatoly Boreysho, Director, Laser Systems

  • HPCL key technologies – search for compromises for mobile platforms
  • The laser beam control along vertical and horizontal directions
  • DF/HF and COIL energy and components transformation
  • Technical solutions for pressure recovery equipment
  • Operational scope of integrated systems
  • clock

    14:30

    DIRECTED ENERGY SYSTEMS AND THE LAW OF WAR

    Dominique Loye

    Dominique Loye, Technical Adviser, Mines-Arms Unit, Legal Division, International Committee of the Red Cross

  • Fundamental principles of the law of war
  • Obligation to assess the legality of any new weapons, means or methods of warfare
  • The Vienna Protocol on blinding laser weapons
  • clock

    15:10

    Chairman’s Closing Remarks followed by Afternoon Tea

    clock

    8:30

    Re-registration and Coffee

    clock

    9:00

    Chairman's Opening Remarks

    Squadron Leader Douglas Vine

    Squadron Leader Douglas Vine, Night Vision Training Specialist, RAF Henlow

    clock

    9:10

    KEYNOTE ADDRESS

    Dr Andreas Neuber

    Dr Andreas Neuber, Associate Professor, Pulsed Power and Power Electronics Research, Department for Electrical and Computer Engineering, Texas Tech University

  • Enabling technology for advanced pulsed power devices and effects simulation devices
  • Related power conditioning technology
  • Primary explosive pulsed power sources
  • Explosive pulsed power and magnetic Flux Compression Generators (FCGs)
  • Simulation of pulsed power generators
  • clock

    9:50

    HIGH POWER PIEZO-ELECTRIC IMPULSE GENERATOR RESEARCH

    Professor Thomas G Engel

    Professor Thomas G Engel, Associate Professor, Electrical Engineering, University of Missouri-Columbia

  • Highest peak power produced 320 kW
  • Highest power density produced 405 kW/cc
  • Capable of multi-shot operation
  • Developed scaling relationships
  • clock

    10:30

    Morning Coffee

    clock

    11:00

    FLUX COMPRESSION GENERATORS

    Dr Bucur Novac

    Dr Bucur Novac, Senior Lecturer, Department of Electronic & Electrical Engineering, Loughborough University

  • FCG - an overview
  • Detonics, physics and technology of helical FCG
  • Numerical modeling
  • Design and testing of helical FCG
  • Conditioning systems
  • clock

    11:40

    PANEL DISCUSSION

    Dr Andreas Neuber

    Dr Andreas Neuber, Associate Professor, Pulsed Power and Power Electronics Research, Department for Electrical and Computer Engineering, Texas Tech University

    Professor Thomas G Engel

    Professor Thomas G Engel, Associate Professor, Electrical Engineering, University of Missouri-Columbia

    Dr Bucur Novac

    Dr Bucur Novac, Senior Lecturer, Department of Electronic & Electrical Engineering, Loughborough University

    Senior Representative

    Senior Representative, from, Loughborough University

    clock

    12:20

    HIGH PERFORMANCE LASER WARNING RECEIVERS

    Dr Clive Coleman

    Dr Clive Coleman, Chief Technologist, Electro-Optical EW Systems, BAE SYSTEMS Avionics

  • Laser threat
  • Systems issues
  • Propagation and scatter effects
  • Performance requirements
  • Series 1223 LWR
  • clock

    13:00

    Chairman's Closing Remarks followed by Networking Lunch

    VENUE

    The Hatton, at etc. venues

    51/53 Hatton Garden, London, United Kingdom

    A number of our clients have been approached by third party organisations offering to book hotel rooms. We would advise that you do not book through them as they are not representing the SMi Group. SMi Group books all hotel rooms directly. If you are approached by a third party organisation then please contact us before making any bookings. If you have already booked a hotel room using a third party organisation, we would highly recommend contacting the hotel you were booked into to ensure a booking has been made for you. We would also advise you to please check the terms and conditions of the booking carefully.
    HOTEL BOOKING FORM

    SAVE TO


    Outlook Calendar  OUTLOOK CALENDAR
    Google Calendar  GOOGLE CALENDAR
    ICal Calendar  ICAL CALENDAR
    Yahoo! Calendar  YAHOO! CALENDAR

    The Hatton, at etc. venues

    51/53 Hatton Garden
    London EC1N 8HN
    United Kingdom

    The Hatton, at etc. venues

    HOTEL BOOKING FORM

    Title

    SubTitle
    speaker image

    Content


    Title


    Description

    Download

    Title


    Description

    Download

    Title


    Description


    Download


    WHAT IS CPD?

    CPD stands for Continuing Professional Development’. It is essentially a philosophy, which maintains that in order to be effective, learning should be organised and structured. The most common definition is:

    ‘A commitment to structured skills and knowledge enhancement for Personal or Professional competence’

    CPD is a common requirement of individual membership with professional bodies and Institutes. Increasingly, employers also expect their staff to undertake regular CPD activities.

    Undertaken over a period of time, CPD ensures that educational qualifications do not become obsolete, and allows for best practice and professional standards to be upheld.

    CPD can be undertaken through a variety of learning activities including instructor led training courses, seminars and conferences, e:learning modules or structured reading.

    CPD AND PROFESSIONAL INSTITUTES

    There are approximately 470 institutes in the UK across all industry sectors, with a collective membership of circa 4 million professionals, and they all expect their members to undertake CPD.

    For some institutes undertaking CPD is mandatory e.g. accountancy and law, and linked to a licence to practice, for others it’s obligatory. By ensuring that their members undertake CPD, the professional bodies seek to ensure that professional standards, legislative awareness and ethical practices are maintained.

    CPD Schemes often run over the period of a year and the institutes generally provide online tools for their members to record and reflect on their CPD activities.

    TYPICAL CPD SCHEMES AND RECORDING OF CPD (CPD points and hours)

    Professional bodies and Institutes CPD schemes are either structured as ‘Input’ or ‘Output’ based.

    ‘Input’ based schemes list a precise number of CPD hours that individuals must achieve within a given time period. These schemes can also use different ‘currencies’ such as points, merits, units or credits, where an individual must accumulate the number required. These currencies are usually based on time i.e. 1 CPD point = 1 hour of learning.

    ‘Output’ based schemes are learner centred. They require individuals to set learning goals that align to professional competencies, or personal development objectives. These schemes also list different ways to achieve the learning goals e.g. training courses, seminars or e:learning, which enables an individual to complete their CPD through their preferred mode of learning.

    The majority of Input and Output based schemes actively encourage individuals to seek appropriate CPD activities independently.

    As a formal provider of CPD certified activities, SAE Media Group can provide an indication of the learning benefit gained and the typical completion. However, it is ultimately the responsibility of the delegate to evaluate their learning, and record it correctly in line with their professional body’s or employers requirements.

    GLOBAL CPD

    Increasingly, international and emerging markets are ‘professionalising’ their workforces and looking to the UK to benchmark educational standards. The undertaking of CPD is now increasingly expected of any individual employed within today’s global marketplace.

    CPD Certificates

    We can provide a certificate for all our accredited events. To request a CPD certificate for a conference , workshop, master classes you have attended please email events@saemediagroup.com

    Event Title

    Headline

    Text
    Read More

    I would like to speak at an event

    I would like to attend an event

    Group Booking

    Please complete the below form and a member of SAE Media Group’s booking team will be in contact within 24 hours

    I would like to sponsor/exhibit at an event

    SIGN UP OR LOGIN

    Sign up
    Forgotten Password?

    Contact SAE Media Group

    UK Office
    Opening Hours: 9.00 - 17.30 (local time)
    SAE Media Group , Ground Floor, India House, 45 Curlew Street, London, SE1 2ND, United Kingdom
    Tel: +44 (0) 20 7827 6000 Fax: +44 (0) 20 7827 6001
    Website: http://www.smgconferences.com Email: events@saemediagroup.com
    Registered in England - SMi Group Ltd trading as SAE Media Group




    Forgotten Password

    Please enter the email address you registered with. We will email you a new password.

    Thank you for visiting our event

    If you would like to receive further information about our events, please fill out the information below.

    By ticking above you are consenting to receive information by email from SAE Media Group.
    Full details of our privacy policy can be found here https://www.smgconferences.com/privacy-legals/privacy-policy/.
    Should you wish to update your contact preferences at any time you can contact us at data.privacy@smgconferences.com.
    Should you wish to be removed from any future mailing lists please click on the following link http://www.smgconferences.com/opt-out

    Fill in your details to download the brochure

    By submitting this form you agree to our privacy policy and consent to receiving communications, you may opt out at any time.